The new E>GO naviceiver generation sticks out with a truly comprehensive feature set and state of the art functionality. Therefore this web page is also detailed and comprehensive, to show you as much info about the this particular product line. We suggest that you read this web content to acquaint yourself with the ZE-NC2010, to learn about the seamless integration with your vehicle, that this unit is capable of.
If you already know this product and the related web page and just want to look up something in particular, then please use this table of contents with the quick links below:
E>GO naviceiver - 100 % custom-fit
Navigation, entertainment, communication – the ZE-NC2010 naviceiver is a complex navigation and multimedia system with a large range of features. ZENEC‘s new top-of-the-line model fits together visually with all automobiles belonging to the GOLF V and GOLF VI lines – the VW Golf VI, Golf V, Tiguan, Eos, Passat, Passat CC, Jetta, Caddy, Touran, Scirocco – as well as with the SEAT models Altea, Leon and Toledo where a new OE trim bezel must be purchased separately for the install.
The white button illumination and the customized design of the front panel makes the E>GO not only perfect for the respective look of the car interior, but the E>GO is also effortlessly integrated into the existing automotive electronics. ZE-NC2010 can be installed into the original dash board of the GOLF V and GOLF VI without further modifications and without any additional adapters: simply take out the factory radio, put in the E>GO and drive off.
Even the connection of the factory-made steering wheel remote control is no problem: simply connect the E>GO to the existing plug – the functionality of the factory installed components is preserved.
ZENEC E>GO – ingeniously easy, visually perfect.
The general features
Navigation, entertainment, communication – going by the motto “Everything must be”, the ZE-NC2010 will convince you through an abundance of equipment features. The built-in CD/DVD drive plays all of the current A/V formats; the new RDS tuner guarantees top-quality radio reception. The high-performance 4 x 50 watts digital output together with the integrated Dolby digital decoder provides for impressive sound quality.
The 6.5“ touchscreen display is also upper class: An innovative TFT LCD panel makes first-class pictures possible – sharp, brilliant and with high-contrast. The display is equipped with a special anti-glare coating so that a clear picture presentation is ensured, even in bad lighting conditions.
ZENEC uses the finest technology even with the built-in Bluetooth system. The ZE-NC2010 is equipped with the CK5050+ Parrot BT module that makes comfortable hands-free and audio streaming (A2DP, AVRCP) possible; the Bluetooth module features updateable firmware.
The SD/SDHC card reader is easily accessible on the front of the device and makes it possible to play music, movies or display photos directly on the E>GO after the navi data on the 4 GB SDHC card is copied to the NAND flash memory. Afterwards, the card slot is free for multimedia use and can be used with SDHC cards up to 8 GB. Naturally iPod and iPhone including video playback can be used – with ZE-NC2010, videos from iPod can not only be shown, but also operated using the touchscreen. USB-port, iPod connection and A/V port (plug) are included in the Medialink box. With the help of this box, you can quickly connect and disconnect additional components.
Other signal sources and additional components such as DVB-T tuners, rear view cameras, or head rest monitors can be connected any time. Naturally all of the functions can be operated on the high definition monitor via touchscreen, starting with the operation of the DVD player, going on to the iPod and the integrated navigation, and all the way to the additional components.
Even the connection on the factory-made steering wheel remote control is no problem: Simply connect it with the included plug and operate the E>GO via the steering wheel remote control.
The connection to an existing multi-functional display (MFA+) is no problem: Navigation arrows, phone information as well as station and track information from the radio/CD/USB, etc. is shown.
The main GUI
Simple and totally straightforward operation has been one of the most critical points taken into account when this naviceiver line up was developed. The graphic user interface (GUI) is well structured and for best usuability, it has been separated in two main GUI start pages. The often cited “intuitive operation” has a really new meaning when it comes to the ZE-NC2010.
The ZE-NC2010 is equipped with an advanced CK5050+ Bluetooth system from Parrot. This makes playing music from a mobile phone and making phone calls in the car as simple as child‘s play.
Make phone calls and play music from your mobile phone: ZENEC‘s naviceiver will establish interconnection with most convenient operation of a Bluetooth compatible mobile phone from a ZE-NC2010 control possible. You do not need any installation kits, fixtures, cables, or even additional speakers in the vehicle‘s interior.
In addition to the hands-free application, audio files from a mobile phone can be read-out (audio streaming via A2DP with AVRCP-profile) and played back in superb quality through the car‘s speakers and operated by touchscreen.
The new Parrot Bluetooth module marks an improvement in mobile communication: advanced signal processing technology, the so called Parrot Beamforming, is provided through a multi-directional, freely positionable microphone which is easily attached to the A-column. With this technology, all surrounding noises and echo effects are eliminated so that the voice is clearer. In cases where an externally mounted microphone is no option, an internal microphone is provided as well.
Hands-Free during the drive – the caller number, phone book entries and other information is clearly shown on the ZE-NC2010 display. The address book of the naviceiver is automatically synchronized with the mobile phone. The Parrot module enables an alphanumeric sorting of phone book entries with an additional search function – a feature that guarantees ease in finding phone book entries, especially for professional use.
Additional Bluetooth featuresedialing switch between hands-free and mobile phone to continue a call via mobile if necessary
memory for dialed and received calls
connection of up to 5 mobile phones, management and hosting of up to 1000 phone book entries
search function using initials
The Bluetooth component firmware from ZE-NC2010 can be conveniently updated using a USB stick, for example if you would like to use a new mobile phone model or business phone in the car. The palette of compatible mobile telephones can be expanded at any time – with the ZE-NC2010 you are always up-to-date.
Navigate unerringly via touchscreen in all of western and eastern Europe – with its integrated navigation system, the naviceiver ZE-NC2010 reliably shows you the way in more than 43 countries. Due to the 400 MHz CPU (128 MB SD RAM) and the customized Nav-Engine software iGO8, the route calculation is very fast.
Enter the desired destination thereby choosing between the various destination and route entries – through address, ZIP/postal code, POI, saved/last found destinations. etc. – and you are ready to go. Your electronic copilot guides you to your destination without detours and shows you, if you so wish, relevant points such as gas stations, hotels, restaurants, parking lots, etc.
Unmistakable navigation is ensured through a clear graphic map display, where various scales and view modes are available in 2-D and 3-D, as well as precise voice guidance (in 28 languages) and an easily understandable GUI display (also in 28 languages).
The automatic zoom at intersections or traffic circles makes sure that there is no confusion even at difficult locations. Tunnel mode and lane assistant plus the 3-D landscape or 3-D city map views (with buildings, places of interest, and city maps) simplify the navigation just as well as the highway split screen mode with real signpost rendering (the display of signs in real-time on the map).
A special feature deployed is the so called split screen mode. Whatever source you are listening to, like radio or music from other audio sources: with the touch of one finger you can activate the split screen mode to see turn arrow and distance information in the right hand pane of the main screen, to never miss an exit or a crossing.
The ZE-NC2010 comes with a TMC and TMC Pro (optional and only in Germany available) receiver. The TMC function keeps you up to date regarding potential traffic jams on the chosen route to destination, while automatic re-calculation of a suitable detour is a function covered as well. Just select the respective TMC function in the control menu and you are also being shown all relevant traffic control message information on your map screen directly.
To activate the TMC Pro service of the ZE-NC2010 naviceiver, you have two options at hand: 1) Buy a prepaid activation card at your authorized ZENEC dealer, the item is called ZE-NC-TMCPRO, or else 2) buy and download the license directly over Naviextras with your credit card.
Did you know that 20% of European roads change every year? New roads are built, existing ones are altered, traffic rules and speed limits are changed, and on top of all this, new restaurants, hotels and other businesses open every day.
With up-to-date maps you can avoid unpleasant surprises and detours, arrive faster and drive more safely.
With the Naviextras online services, you can easily update or upgrade the map data of your ZENEC navigation system, or download the latest 3D landscape and city maps. At all times, during night and day – no matter where you are. Naviextras really stands out with keeping your system always up-to-date, allowing you to compile interesting new features and all the content you wish to run on your nav hardware, in no time.
Map-updates: arrive faster and drive more safely
additional 3 D landmarks: monuments and historic buildings, realistic terrain elevation (mountains, hills and valleys), and an increasing coverage for cities, with buildings mapped in 3D.
additional voices and languages
This Naviextras Toolbox is necessary to guaranty the compatibility between Naviextras and your navigation software. For further information, please take a look at Downloads.
Especially practical: USB-Port with iPod connection and plug 3.5 mm A/V port are in the included, very compact media-link box. With the help of this box (1.5 m cable extension), which can be easily placed in the center console or in the glove compartment, you can quickly connect and disconnect additional components.
You can found further information about the optional iPod/iPhone interface cable on this page:
The ZE-NC2010 fits to the following cars.
VW Golf VI from 08/2008 VW Golf V from 09/2003
VW Jetta from 08/2005 VW Scirocco from 2008
VW Tiguan from 2007 VW Touran from 03/2003
VW Passat from 03/2005 VW Passat CC from 08/2008
VW Eos from 05/2006 VW Caddy from 07/2004
SEAT Altea from 05/2004 SEAT Altea XL from 04/2007
SEAT Leon from 09/2005 SEAT Toledo from 12/2004
ZENEC All-In-One - this does not mean only full compatibility to all popular audio and video formats, but also the easy integration of further ZENEC devices like DVB-T tuner, rear view cameras or monitors for perfect rear zone entertainment.
The integrated DVD/CD/MP3/WMA player
Playback of CD, CD-R/RW, MP3, WMA, DVD, DVD±R/RW, DVD-MP3, MPEG4, DivX6, VCD, SVCD, AVI, JPEG, Picture CD Regional Code 2 Integrated Dolby Digital decoder Electronic (ESP) and mechanical anti-shock system Last-playback-memory function The integrated 6.5" LCD monitor 6.5"/16:9 LCD display with touchscreen-control
Anti-glare coated display
High brightness 450 cd/m2
High resolution 1440 x 234 (336960 Pixel)
Extended viewing angle left/right > 60°/ up > 30°/ down > 60°
The RDS-tuner
Radio data system (RDS)
FM/AM-tuner
30 preset stations (18 FM/12 AM)
Best stations memory (BSM)
The GPS-Navigationssystem
iGO8 navigation software and pre-installed map data for 43 Eastern and Western European countries
Western Europe: Andorra, Austria, Belgium, Denmark, Finland, France, Germany, Gibraltar, Ireland, Italy, Liechtenstein, Luxembourg, Monaco, Netherlands, Norway, Portugal, San Marino, Spain, Sweden, Switzerland, United Kingdom, Vatican
Eastern Europe: Albania, Belarus, Bosnia-Herzegovina, Bulgaria, Croatia, Czech Republic, Estonia, Greece, Hungary, Latvia, Lithuania, Macedonia, Montenegro, Moldova, Poland, Romania, Serbia, Slovakia, Slovenia, Turkey, Ukraine
Voice guidance in 28 languages
Menu in 28 languages
TMC und TMC Pro (only in Germany available)
external TMC Box
Multi destination search
Lane information
2D- and 3D map display with auto-zoom-function and 3-D Citymap
Including 3D-buildings, 3D-landmarks and 3D-terrain representation
Splitscreen mode
TTS "Text-to-Speech" funktion
Tunnel mode
Rich POI data base
The A/V-connections
2 x RCA composite video outputs (NTSC)
1 x RCA input (RCA)
1 x RCA video input for rear view camera with automatic switching function
2-CH RCA preamp line outputs without volume adjustment
Analog 5.1 RCA preamp line outputs (front, rear, center and subwoofer)
The additional features
Integrated SD-card reader – SDHC compatible (up to 8 GB)
integrated Parrot Bluetooth module with internal and external microphone
Complete control via touchscreen for iPod/iPhone
USB 2.0 Port (max. 500 mA)
Including Media-Link-Box
Theft protection (security code)
Integrated 4 x 50 watts digital amplifier
Multi-Zone funktion
Key illumination white
Menu in different languages: English, Estonian, Czech, German, Dutch, French, Italian, Norwegian, Polish, Portuguese, Romanian, Spanish
Including 2 x IR-remote control
